Automatic Welding Carriage Machine
GC-5K
GC-4F
GC-5B
GC-TD1
GC-5K
Fillet Ultra Light Automatic
Welding Carriage Machine
Specification
Body
Dimension : 210(W) x 230(L) x 260(H)
Weight : 4.9kg
Driving Method : Four by four / Magnet desiccant
Magnet : Permanent Magnet
Driving Speed : 0 ~ 1,200mm/min
Range of Torch
- Top and Bottom 30mm
- Front and Rear : 30mm
- Angle : 25º ~ 65º
Function
- Power lamp
- Start / Stop switch
- Forward / Backward
- Welding / Non-welding
- Speed control
- Magnet handle
Power Source : AC220V 50/60Hz , DC24V 50/60Hz
Torch
Usage Rate : 500A / 70%
Wire : Ø1.2, Ø1.4, Ø1.6
Length : 5m
Tool
L-wrench (3/4mm) - each 1pcs
Fuse (AC250V 2A)
GC-4F
Dual Side Fillet Automatic Welding Carriage Machine
Specification
Size : 320(L) x 480(W) x 335(H)
Weight : 10.4kg
Power : AC 85V ~ 260VA 60Hz / 50Hz
Drive System : Driving motor x Decelerator x 4 wheel chain driving
Drive Speed : 0 ~ 1,000 mm/min
Torch Adjustment :
- Right / Left : 32mm
- Up / Down : 32mm
Torch Fine Control :
- X-axis : 0 ~ 30mm
- Y-axis : 0 ~ 30mm
Torch Angle Control : ±45º (at straight torch)
Drive Motor : DC 24VA / 3,000rpm
Reducer (Decelerator) : 250:1
Control Box :
- Power lamp, Start, Stop, Speed, Forward/Backward,
- Torch1 welding/Non-welding, Torch2 welding
Welding Torch (Option) : 4m 500A Air-cooled Straight line torch
GC-5B
Fillet Multi Stitch Automatic Welding Carriage Machine
Features
For fillet welding
Do continuous or single work
Stop automatically
Specification
Size : 216(L) x 480(W) x 335(H)
Weight : 5.72kg
Drive System : Operation motor x Decelerator x 4-wheel driving chain
Drive Speed : 0 ~ 1,200 mm/min
Torch Control :
- Right / Left : 32mm
- Up / Down : 32mm
Torch Angle Control : ±45º (at straight torch)
Input Power : AC 110V ~ 220V 60Hz/50Hz
Drive Motor : BLDC motor 20W 24V / 3,000rpm
(BLDC = BrushLess electric DC motor)
Reducer (Decelerator) : 100:1
Control Box :
- Display window, Welding/Non-welding, Drive(Reduce), Stop(Memory), (Speed up) Drive,
- Speed selection function ( Series, Single, Welding, Non-welding, Distance)
Welding Torch (Option) : 4m 500A Air-cooled straight line torch
GC-TD1
Tandem Double Torch Fillet Welding Carriage Machine
Features
- Two torches can automatically fillet weld for heavy welding work.
- Suitable for heavy steel plate welding as two torches weld consistently while maintaining regular intervals.
- Non-contact limit switches equipped at the end of both sides of the machine, and it helps to weld in both ways.
Specification
Size : 260(L) x 254(W) x 320(H)
Weight : 7.9kg
Drive System : Driving motor x Decelerator x 4-wheel driving chain
Drive Speed : 0 ~ 1,000 mm/min
Torch Control :
- Right / Left : 32mm
- Up / Down : 32mm
Torch Angle Control : ±45º (at straight torch)
Input Power : AC 220V 60Hz/50Hz
Drive Motor : DC90VA / 3,000rpm
Reducer (Decelerator) : 250:1
Control Box :
- Power lamp, Start, Stop, Speed, Forward/Backward
- Torch 1 welding/Non-welding, Torch 2 welding/Non-welding
Welding Torch (Option) : 4m 500A Air-cooled straight line torch
GC-9B
Vertical Weaver Carriage
(with Remote Controller)
Features
- Photo Interrupter (Non-contact type) is adopted for Torch Weaving module. Thus, because it is installed at the backside of control part, the durability of weaving module can be excellent even at severe conditions.
- Left / Right stop function for helping weld penetration. (0~3 sec.)
- 'Stop the torch at the center point' function has equipped when weaving stops.
- In the blackout(power failure) or the initial setting conditions, torch automatically positioned at the center point.
- Escpecially, the control box of this machine has the great durability.
- It has equipped filters and microcontrollers which can functions to block out the noise or high frequency from welding work.
- Therefore, we guarantee this machine can do accurate left/right weaving angle and accurate traveling operation even at various severe conditions.
Specification (Body)
Size : 315(L) x 262(W) x 270(H)
Weight : 7.9kg (Remote Controller 0.25kg)
Input Power : AC 85V ~ 260VA 60Hz/50Hz
Drive Speed : 0 ~ 1,000mm/min
Drive Motor : BLDC
Slide Range : ±25mm
Specification (Weaving Parts = Weaver)
Weaving Motor : BLDC
Weaving Angle : 5 degree (Left 2.5º / Right 2.5º)
Weaving Speed : 60 times/min (in maximum weaving angle)
Weaving Stop : Left 0~3sec. / Right 0~3sec.
Weaving Mode :
Control Box : Weaving, On, Off, Weaving Speed, Left Weaving Width, Right Weaving Width, Left/Right Weaving Stop Time Control
